| PART |
Description |
Maker |
| MICROFOX-EO |
Electronic front cutter, 20° angle, without chamfer, with opening spring
|
PHOENIX CONTACT
|
| MICROFOX-SC |
Diagonal cutter for Cu wire up to 1.5 mm diameter
|
PHOENIX CONTACT
|
| PPS-CLASSIC-M |
Profile cutter, for cutting and stamping holes in standard DIN rails
|
PHOENIX CONTACT
|
| PPS-90-STANDARD-M |
Profile cutter, for cutting and stamping holes in standard DIN rails
|
PHOENIX CONTACT
|
| REJ03F0034_M61522FP REJ03F0034M61522FP M61522FP |
ASSP>Electronic Volumes>Audio Signal Processors
8ch ELECTRONIC VOLUME WITH 8 INPUT SELECTOR
|
ETC[ETC]
List of Unclassifed Manufacturers
Renesas Electronics Corporation
|
| CUTFOX-SP-BOLT-VDE |
Power diagonal cutter, 200 mm, induction-hardened cutting, VDE 1000 V AC/ 1500 V DC tested
|
PHOENIX CONTACT
|
| AAT4650 AAT4650IAS-B1 AAT4650IAS-T1 AAT4650IHS-B1 |
Combo Serial / USB interface board with cutter control for FTP-629. 639
5V/3V PC Card Power Switch
|
Advanced Analogic Technologies, Inc.
ANALOGICTECH[Advanced Analogic Technologies]
|
| 2203154 |
Handheld housing, C-Mini-Plus, light gray, consisting of two half shells, two front plates with screws, front 1.1 mm recessed, closed
|
PHOENIX CONTACT
|
| 202 200-30C 200-45 200-22 |
WALZENROHRABSCHNEIDER 10-60MM
TUBE CUTTER 15-45MM
ROHRABSCHNEIDER 3-22MM
ROHRABSCHNEIDER 3-30MM ROHRABSCHNEIDER 3 - 30毫米
|
3M Company
|
| AD9861 AD9861-50EB AD9861BCPRL-50 AD9861-80EB AD98 |
10-Bit Mixed-Signal Front-End (MxFE™)Processor
Mixed-Signal Front-End (MxFE⑩) Baseband Transceiver for Broadband Applications
|
Analog Devices
|
| AD73311 AD73311AR AD73311ARS EVAL-AD73311EB EVAL-A |
Single-Channel, 3 V and 5 V Front-End Processor for General Purpose Applications Including Speech and Telephony
Low Cost, Low Power CMOS General Purpose Analog Front End
|
AD[Analog Devices]
|
| TDA7521 6149 |
ANALOG FRONT END
Analog Front End
From old datasheet system
|
STMicroelectronics
ST Microelectronics
|
